Loading ...
TORQUE WRENCH 3/8
DRIVE w/ 7/32 Allen
Product Assembly
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed.
Read each step carefully before beginning.
SOCKET SET 3/8 DRIVE
WITH 6” EXT for 3/4 SAE
OPEN & CLOSED WRENCH
for 3/4 SAE
ALLEN WRENCH SET
1/16” thu 3/8" SAE
THE FOLLOWING TOOLS ARE RECOMMENDED FOR ASSEMBLY:
STEP 1a: Foam Roller Holders
Insert FOAM ROLLER HOLDERS (3) into the ADJUST
TUBE - Assembly (2-ASM).
STEP 1b: Install Foam Rollers
Slide END CAP, LARGER (5) then the FOAM
ROLLER (4) onto each side of FOAM ROLLER
HOLDERS (3), one bar post at a time.
NOTE: Confirm centered with equal distance on
both Right & Left Sides.
STEP 1c: Secure Foam Rollers
Then slide a HEX RECESSED HEAD BOLT, 5/16" x 1-1/4" (8) through the END CAP, SMALLER (6)
and the BIG WASHER, φ8 (7). Hand tighten at this time with an 7/32 Allen Wrench.
2
TORQUE WRENCH 3/8
DRIVE w/ 7/32 Allen
Loading ...
Loading ...