1. Attach two screws to the mounting strap, and secure
with two lock nuts.(You can adjust the length of the
screws if necessary.)
2. Attach the mounting strap to the ceiling box by using
two mounting screws.
3. Adjust the arms of the fixture according to the drawing
of the package.
Important to know:
a.The distance between the arms should
be equally distanced.
b.The arms should be fixed securely.
4. Cut the redundant wires if necessary, and make wire
connections with wire nuts:
---Connect the smooth wire (marked) from fixture to
the black wire from power source.
---Connect the ridged wire (unmarked) from fixture to
the white wire from power source.
---Attach the fixture grounding wire to the mounting strap
with the green grounding screw. Then connect it to the
house grounding wire with the wire nut.
Carefully tuck wires back into the ceiling box.
5. Unscrew two bolt nuts from the canopy-1, attach the canopy-1
to the mounting strap, and secure with the bolt nuts.
6. Secure the stem into the coupling.
7. Install bulbs.(Please do not exceed the maximum capacity
that is recommended on the package.)
8. Attach the glass shade, rubber pad and metal pad upward to the
stem, and then secure with the hex nut.
9. Attach the cap upward to the glass shade, and then secure with
the finial.
10.Turn on the power at fuse or circuit box.
N
OT
E: Be
fore
i
n
s
talling, c
o
n
s
u
lt
l
o
c
a
l
e
le
c
tric
a
l
c
o
d
e
s
fo
r
wir
in
g
a
nd
g
rou
n
d
in
g
requi
re
m
ents.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
350-4826
Installation Steps
Canopy-1
Bolt Nut
Arm
Socket Base
Coupling
Stem
Glass Shade
Cap
Hex Nut
Metal Pad
Rubber Pad
Finial
For Semi-Flush
For Pendant:(See Fig.1)
1. Attach the nipple-1 to the mounting strap, and secure with
a washer and a hex nut.
2. Attach the mounting strap to the ceiling box by using two
mounting screws.
3. Follow step 3 as for Semi-Flush.
4. Thread the fixture wire and fixture grounding wire through the
loop, and secure the loop onto the nipple-2.
5. Choose a certain length of the chain you need, and weave the
fixture wire and the fixture grounding wire through the chain links.
Spread one end of the chain link to clamp securely to the loop.
6. Secure the top loop to the nipple-1.
7. Thread the fixture wire and fixture grounding wire through the collar,
canopy-2, top loop, nipple-1 and mounting strap in order.
8. Clamp the other end of the chain link to the top loop.
9. Follow step 4 as for Semi-Flush.
10. Attach the canopy-2 to the mounting strap by inserting the
top loop, and secure with the collar.
11. Follow steps 6~10 as for Semi-Flush.
Lock Nut
Ceiling Box
Wire Nut
Screw
Mounting Strap
Green Grounding Screw
House Grounding Wire
Fixture Grounding Wire
Mounting Screw
Fixture Wire
Nipple-2
Fixture Wire
Chain
Mounting Screw
Nipple-1
Fixture Grounding Wire
Collar
Top Loop
Canopy-2
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Ceiling Box
Loop
House Grounding Wire
Canopy-1
Mounting Parts For Pendant
Fig.1
050906
Patriot Lighting
TM
