Loading ...
Loading ...
Loading ...
ATTACHING BLADE
SeeFigure2.
P,
WARNING: A 5-1/2 in. blade is the maximum blade
capacity of the saw. Never use a blade that is too
thick to allow outer blade washer to engage with the
flats on the spindle. Larger blades will come in con-
tact with the blade guard, while thicker blades will
prevent blade screw from securing blade on spindle.
Either of these situations could result in a serious ac-
cident.
• Locate latches on side of battery pack and depress to
releasebattery pack from the saw.
• Remove blade wrench (5 mm hex key)from storage
area.
• Depress spindle lock button and remove blade screw
and outer blade washer.
NOTE: Turn blade screw clockwise to remove.
• Wipe a drop of oil onto inner blade washer and outer
blade washer where they contact blade.
,&
AI& WARNING: If inner blade washer has been re-
moved, replace it before placing blade on spindle.
Failureto do so could cause an accident since blade
will not tighten properly.
• Fit saw blade inside lower blade guard and onto
spindle.
NOTE: The saw teeth point upward at the front of saw
as shown in figure 2.
• Replace outer blade washer.
• Depress spindle lock button, then replace blade screw.
Tighten blade screw securely.
NOTE: Turnblade screw counterclockwise to tighten.
• Return blade wrench to storage area.
NOTE: Never use a blade that istoo thick to allow the
outer blade washer to engage with the flats on the
spindle.
SPINDLE
LOCKBUTTON
LOWERBLADE
GUARDHANDLE
BLADE
J
INNER
BLADEWASHER
BLADEWASHER
BLADESCREW
Fig.2
12
Loading ...
Loading ...
Loading ...