Loading ...
Loading ...
Loading ...
warrne_"weatheroverprimingmaycause
floodingandenginewill notstart. Ifyou
dofloodengine,wait afewminutesbefore
attemptingto stairanddo not repeat
primingsteps.
MOWINGTIPS
o Under certain conditions, such as very tall
grass, itmay be necessary to raise the
height of cut to reduce pushing effort and to
keep from overloading the engine and
leaving clumps of grass clippings,
° For extremely heavy cutting, reduce the
width of cut and raise the rear of the lawn
mower housing one (1) wheel adjuster
setting higher than the front for better
discharge of grass.
° When using a rear discharge lawn mower in
moist, heavy grass, clumps of cut grass
may not enter the grass catcher° Reduce
ground speed (pushing speed) and/or run
the lawn mower over the area a second
time°
• If a trail of grass clippings is left on the fight
side of a rear discharge lawn mower, mow
in a clockwise direction with a small overlap
to collect the clippings on the next pass.
• Keep top of engine around starter clear and
clean ofgrass clippings and chaff. This will
help engine airflow and extend engine life_
• Pores in cloth grass catchers can become
filled with dirt and dust with use and
catchers will collect less grass. To prevent
this, regularly hose catchers off with water
and letdry before using.
MULCHING MOWING TiPS
IiV1PORTANT:For best performance, keep
mower housing free of built-up grass and
trash. See "Cleaning" in Maintenance section
of this manual.
° The special mulching blade will recut the
grass clippings many times and reduce
them in size so that as they fallonto the
lawn they will disperse intothe grass and
notbe noticed_ Also, the mulched grass will
biodegrade quickly to provide nutrients for
the lawn. Always mulch with your highest
engine (blade) speed as this will provide the
best recutting action of the blades_
= Avoid cutting your lawn when itis wet. Wet
grass tends to form clumps and interferes
with the mulching action, The best time to
mow your lawn is the early afternoon. At
this time the grass has dded and the newly
cut area will not be exposed to the direct
sun.
° Forbest results, adjust the lawn mower
cutting height so that the lawn mower cuts
off only the top one-third of the grass blades.
Ifthe lawn is overgrown itwill be necessary
to raisethe height of cut to reduce pushing
effort and to keep from overloading the
engine and leaving clumps of mulched
grass° For extremely heavy mulching,
reduce your width of cut by overlapping
previously cut path and mow slowly.
° Certain types of grass and grass conditions
may requirethat an area be mulched a
second time to completely hide the
clippings. When doing a second cut, mow
across or perpendicular to the first cut path.
o Change your cutting pattern from week to
week. Mow north to south one week then
change to easttowest the next weeko This
will help prevent matting and graining ofthe
lawn.
Max 1/3
Loading ...
Loading ...
Loading ...