Loading ...
Loading ...
Loading ...
NOTE: We donotrecommendsharpen-
ing blade- butifyoudo,be suretheblade
isbalanced.
TOSHARPENBLADE
Careshouldbetakento keeptheblade
balanced. An unbalancedbladewill
causeeventualdamageto lawnmoweror
engine.
- Thebladecanbesharpenedwithafileor
onagrindingwheel.Donotattemptto
sharpenwhileonthemower.
o Tocheckbladebalance,driveanailintoa
beamorwalloLeaveaboutoneinchofthe
straightnailexposed.Placecenterholeof
bladeovertheheadofthenail Ifbladeis
balanced,itshouldremaininahorizontal
position,tfeitherendoftheblademoves
downward,sharpentheheavyenduntilthe
bladeisbalanced.
Blade Crank shaft
adapte r __-'=_,,_.k_yway
Key
Blade I \ zL_Ji_i-,Crank
bo, f \'" 1" st,a.
Lock \ Trailin Blade
washer' Hardened edge adapter
washer
GRASS CATCHER
o The grass catcher may be hosed with
water, but must be dry when used.
° Check your grass catcher often for damage
ordeterioration. Through normal use itwill
wear. if catcher needs replacing, replace
only with a manufacturer approved
replacement catcher. Give the lawn mower
model number when ordering.
DRIVE WHEELS
Check front drive wheels each time before
you mow to be sure they move freely.
The wheels not turning freely means trash,
grass cuttings, etc. are in the drive wheel
area and must be cleaned to free drive
wheels.
If necessary to clean the drive wheels,
check both front wheels.
° Remove hubcaps, hairpin cotters and
washers.
= Remove wheels from wheel adjusters.
- Remove any trash or grass cuttings from
inside the dust cover, pinion and/or drive
wheel gear teeth.
o Put wheels back in place.
o If after cleaning, the drive wheels do not
turn freely, contact your nearest
authorized service center.
GEAR CASE
o To keep your drive system working
properly, the gear case and area around
the drive should be kept clean and free
of trash build-up. Clean under the drive
cover twice a season.
• The gear case is filled with lubricant to
the proper tevel at the factory. The only
time the lubricant needs attention is if
service has been performed on the gear
case.
° If lubricant is required, use only Texaco
Starplex Premium 1 Grease, Part No_
750355. Do not substitute.
ENGINE
LUBRICATION
Use only high quality detergent oilrated with
APt service classification SF,SG, or SH.
Select the oil'sSAE viscosity'grade accord-
ing to your expected operating temperature.
SAE VISCOSITY GRADES
0= _0_ _0" 30*
RANGE ANTICIPATED BEFO_tE NEX3" OIL CHANGE
NOTE: Although multi-viscosity oils
(5W30, 10W30 etc.) improve starting in
cold weather, these multi-viscosity oils wilt
result in increased oil consumption when
used above 32°F. Check your engine oil
level more frequently to avoid possible
engine damage from running low on oil.
Change afterthe first25 hours of operation at
least oncea year ifthe lawn mower isnet used
for 25 hours inone year.
Check the crankcaseoillevel before starting
the engineand after eachfive (5) hours of
continuoususe. Tightenoilplug securely each
timeyou checktheoillevel.
TO CHANGE ENGINE OIL
NOTE: Before tipping lawn mower to
drain oil, drain fuel tank by running engine
until fuet tank is empty.
o Disconnect spark plugwire from spark plug
and place wire where it cannot come in
contact with spark plug.
12
Loading ...
Loading ...
Loading ...