Loading ...
Loading ...
Loading ...
15
MAINTENANCE AND SERVICE
MAINTENANCE METHODS
• Before undertaking cleaning or maintenance, turn the appliance off by pressing the ON/OFF button, then
always unplug the appliance from the power supply outlet.
• Do not use chemical solvent to clean the surface of the unit. Never spray insecticides or similar in the vicinity
of the unit.
• Clean the surface of the unit with a damp cloth, then dry with a dry cloth.
CLEANING THE AIR FILTER
Clean the evaporator filter every two weeks of operation.
This will keep the air conditioner working efficiently.
(1) Evaporator Filter (Fig 1)
(a) Push down on the tabs to remove the
evaporator filter
(b) Wash the filter by immersing it gently into
warm water (about 40 degrees celsius with a
dishwashing detergent)
(c) Rinse the filter of detergent and dry it thoroughly
in a shaded place
(d) Insert the filter back to its original position and
then attach the intake grill to the appliance
(2) Condenser Filters
The condenser filters are in two pieces.
(a) Remove the two screws securing the plastic
cover retaining the first filter. Remove filter
from housing. (Fig 2)
(b) Grasp plastic tab and remove second filter (Fig 3 & 4)
(c) Clean as per instructions for evaporator filter
(d) After cleaning reinsert filter part with plastic tab first.
Then reinstall second filter part in plastic housing and
secure with the two screws.
END OF SEASON OPERATIONS
• Switch off the unit and disconnect the plug from the power supply outlet.
• Remove the plug from the bottom drain outlet to drain the water onto the drain pan and dispose of the water.
Tilt the unit by lifting it at the front to ensure all water is removed from the water tank. Then operate the unit
in fan mode for half a day until the pipe is dry.
• Wind the cable around the cable hooks on the back of the appliance.
• Wrap the appliance with the plastic bag and keep it in a dry place.
12
Fig 1 Fig 2
Fig 3 Fig 4
Loading ...
Loading ...