Loading ...
Loading ...
Loading ...
8
Using Your Oven
Using Your Oven
A C B
Suitable Cookware
A: Gas thermostat control knob
B: Time knob, sets timer for up to 1 hour
C: Digital temperature reading
LIGHTING INSTRUCTIONS
1. Before lighting, reset gas control knobs to the OFF position.
2. Check that the main inlet gas valve is OPEN.
3. Keep the oven door in the open position for the full ignition
process to view the pilot and burner until lit.
4. Push and turn the gas control knob counterclockwise to
position until pilot lights. (you will hear a small clicking noise.)
5. If ignition does not occur in 5 seconds, turn gas control knob off, wait 2 minutes
and repeat the lighting procedure.
6. Once the pilot flame is lit, continue to hold the oven control knob in for 10-15
seconds, then release knob and verify pilot stays lit. Repeat the above steps if pilot
goes out after releasing the knob. (Keep the oven door open for this process)
7. After the pilot flame is ignited and the control knob is released, then turn the
control knob counter-clockwise to the required temperature setting.
8. Within 20 seconds of the pilot flame being lit the main burner flame will
automatically ignite, confirm with a visual inspection before closing the oven door.
Loading ...
Loading ...
Loading ...