Loading ...
Loading ...
Loading ...
Installation Instructions
INSTALLING THE WATER LINE (CONT.)
[] PLUG IN THE REFRIGERATOR
__rranoe the coil of tubing so that it does not xibrate
against tile back of tile refri,,erator_ or against, tile
wall. Push the refrigerator back to the wall.
START THE ICEMAKER
Power switch models - Set tile icemaker power
switch to the I (on) position. The icemaker will
not begin to operate tmtil it reaches its operating
temperature of 15°F (-9°C) or below. It will then
begin operation automatically if the icemaker
power switch is in the I (oil) position, and the
green light will come on.
Power
Switch icemaker
Light
Power switch model
START THE ICEMAKER (CONT.)
Feeler arm models - Move tile feeler arm to tile
ON (down) position. Tile icemaker will not begin to
operate until it reaches its operating temperature
of (l 5 F) (-9 (:) or below. It will begin operation
automaticallv if the icemaker teeler am_ is in the
ON (down) position.
_rqin the
STOP(up)position
FeelerArminthe ON
(down)position
Feeler arm model
NOTE: In lower water pressure conditions, tile
3 "
wateI" xalxe max tt/i'ii oi1 tl I) to . tlInes to delixer
ello/l(rh water to tile icelnakei:
REVERSING THE DOOR SWING
IMPORTANT NOTES
When re\'e_ing tile door swing:
• Read tile instructions all tile way through before
starting.
• Handle parts careflfllv to avoid scratching paint.
• Set screws down bv their related parts to aw)id using
them in the wrong places.
• Provide a non-scratching work sm'tace for tile doors.
IMPORTANT: Once vou begin, do not Inove tile
cabinet tmtil doo>swi_g reversal is completed.
These instructions are for changing tile hinges fl'om
the right side m the lett side---if wm ever want to change
the hinges back to the fight side, follow these same
instructions and reverse all reterences to left and fight.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy
compartment.
TOOLS YOU WILL NEED
Phillipsscrewdriver
Puttyknife or
thin-bladescrewdriver
5/16" Headsocketdriver
3/4" Headsocketdriver
(a6-pointsocketis
recommended)
Maskingtape
18
Loading ...
Loading ...
Loading ...