Loading ...
Loading ...
Loading ...
User instructions
43
6. Troubleshooting
The dishwasher has an autodiagnosis system capable of detecting and
indicating a preset series of possible malfunctions.
TABLE OF MALFUNCTIONS DETECTED BY THE AUTODIAGNOSIS SYSTEM
FAULT DESCRIPTION
Error 01
Anti-flooding system tripped (where installed).
Error 02
The system that limits the water level in the dishwasher has been tripped.
Error 03
The dishwasher is unable to heat the water.
Error 04
Temperature sensor disconnected.
Error 05
The dishwasher is unable to fill with water
Error 06
The dishwasher is not able to pump out the water from the tank.
Error 07
The dishwasher is not able to measure the amount of water loaded
accurately.
Error 08
Anomaly in the system which distributes water to the baskets.
Error 09
Water intake system malfunction.
Error 11
Washing pump failure
If an alarm situation occurs, the appliance interrupts the program in progress
and signals a fault.
Alarms 01, 02, 03, 04, 08 and 09 interrupt the current program
immediately.
Alarms 05 and 06 interrupt the current program; once the problem is
solved, the program will finish running.
Alarm 07 is displayed at the end of the cycle, which however is completed
since the problem does not interfere with operation of the dishwasher.
Error 11: Contact the after-sales service.
To reset an alarm:
open and close the door, or turn the machine off and on again. The
dishwasher can now be programmed again.
If the malfunction persists, contact your authorised Service Centre.