Loading ...
Loading ...
Loading ...
User instructions
20
DELAYING THE PROGRAM
The start of the wash program can be delayed to program the dishwasher
to operate at the preferred time of day (e.g. overnight). Press the
PROGRAM DELAY button to activate the option and show a 1 hour delay
on the display. Keep pressing to select the delay required, which may be
up to 24 hours.
During programming, the delay selected is shown on the top display. To
reset the delay selected, hold the button down until 0h appears on the
display.
When the door is closed, the appliance will prewash the dishes, after
which the "program delay" set will come into effect.
The message "Start in "X" hours" appears on the front display.
Until the wash program starts, the selected delay can be reset by holding
the button down
until
0h
appears on the display.
CANCELLING THE PROGRAM IN PROGRESS
- Open the door (watch out for water splashes)
- Press the START button and hold it down until P0 appears on
the top display.
- Close the door (00:01 appears on the front display)
- After about 1 minute the program will be cancelled (“End”
appears on the front display).
CHANGING THE PROGRAM
To change the program in progress, simply open the door (watch out for
water splashes) and select a new program. When the door is closed the
dishwasher will automatically run the new program.
TO SAVE ENERGY AND PROTECT THE ENVIRONMENT
Always try to use the dishwasher with a full load.
Do not wash the dishes in running water.
Use the wash program that is most appropriate for each type of load.
Do not perform preliminary rinsing.
If available, connect the dishwasher to a hot water supply up to 60°C.
Use the ENE
RSAVE option
Loading ...
Loading ...
Loading ...