Loading ...
Loading ...
Loading ...
11
10. Select cycle options, if desired
Select the number of rinses by turning the Rinse knob to the
desired setting.
IMPORTANT: The Rinse knob must be set to an option
“w/Fabric Softener” when using the fabric softener
dispenser. This ensures that fabric softener is added
at the correct time in the rinse for even distribution.
Set the Water Level knob to the Auto Sensing setting and
the washer will ll to a level that ensures the load engages
the agitator. From this point, the electronic control will sense
the load and determine if additional water is needed.
Set the Water Level knob to the Deep Water Wash setting
and the washer will ll to the maximum water level.
NOTES:
■ Cycle times will be longer due to extended ll times
when using the Deep Water Wash setting.
■ Deep Water Wash is not available in the Normal cycle
mode. Selecting the Normal cycle with the Deep Water
Wash setting will result in auto sensing of the water level.
11. Press START/PAUSE button
to begin wash cycle
Press the START/PAUSE button to start the wash cycle. When
the cycle has nished, the Done indicator will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and prevent rusting of metal hooks, zippers,
and snaps.
Adding garment(s)
If you need to open the lid to add one or two missed
garments: Press the START/PAUSE button. The lid will
unlock once the washer movement has stopped. This may
take several minutes if the load was spinning at high speed.
Add garments, close lid, and press the START/PAUSE
button again to restart the cycle.
NOTE: Washer will not ll with the lid open.
IMPORTANT: If lid is left open for more than 10 minutes,
the water will pump out automatically.
Manual Soak
If you would like to manually soak your garments at any
time during the wash portion of the cycle, press the START/
PAUSE button and leave the lid closed. Once your desired
soak time has elapsed, press the START/PAUSE button again
to continue the cycle. As long as the lid remains closed, your
soak time can be longer than 10 minutes. However, if the lid
is opened during the soak and remains open for more than
10 minutes, the water will pump out automatically.
12. Manually add fabric softener
(models without dispenser)
During the nal rinse, wait until the washer has completed
lling, then press the START/PAUSE button to pause the
washer. Lift the lid and add the measured recommended
amount of liquid fabric softener. Do not use more than
the recommended amount. Close the lid and press the
START/PAUSE button again to start the washer.
IMPORTANT: Always select Extra Rinse when manually
adding fabric softener. The Extra Rinse option uses
additional water and agitation for proper fabric softener
distribution.
Loading ...
Loading ...
Loading ...