Loading ...
Loading ...
Loading ...
• Removeblowertubeandshoulder
strapfromengine.
• Insertascrewdriverunderthetabin
the latch area on vacuum inlet cover.
Outlet
Latch Area
i_ Vacuum
Inlet Cover
• Gently tilt the handle of the screwdriver
forward toward blower outlet while pull-
ing up on the vacuum inlet cover with
your other hand.
• Hold the vacuum inlet cover open until
upper vacuum tube is installed.
• Assemble upper vacuum tube to unit;
turn clockwise to tighten.
• Align slanted end of lower vacuum
tube as shown. Firmly push lower vac-
uum tube into upper vacuum tube.
• Insert the elbow tube into the blower
outlet. Make sure the elbow tube is
curved to the left.
• Turn tube counterclockwise to tighten.
When installed properly, the elbow
tube should curve away from the vacu-
um tubes.
• When converting back to the blower
feature, make sure latch on the vacu-
um inlet cover is securely fastened.
Elbow Tube
Curved To
The Left
Slanted
End
SHOULDER STRAP ADJUSTMENT
(for vacuum use only)
• Hold the unit as shown.
• Pass the shoulder strap over your
head and onto your left shoulder.
• Snap the hook onto the retainer on the
top handle.
• Extend you right arm toward the rear of
the vacuum bag.
• Adjust shoulder strap until the vacuum
bag/shoulder strap seam lies between
your thumb and index finger.
• Make sure air flows freely from the el-
bow tube into bag. If bag is kinked, the
unit will not operater properly.
Retainer
Vacuum Inlet Cover Vacuum Inlet
-5-
Loading ...
Loading ...
Loading ...