Loading ...
Loading ...
Loading ...
8
http://www.NewAir.com
ASSEMBLY & INSTALLATION
BASE ASSEMBLY
1. Remove the four screws from the center of base.
2. Place the Telescope Pole onto the Base, align the four screw holes in both
parts, then insert each hole with the screw and tighten them together
firmly with four washers and four nuts at the base bottom. (Fig. 2 & Fig. 3)
3. Remove the Height Adjustment Knob, insert the cover from top of the
Telescope Pole and slide it down onto the base. Raise the Inner Fig.2 Pole
to desired height, and then retighten the Height Adjustment Knob
clockwise until secured. (Fig. 4)
Fig. 4
FAN HEAD ASSEMBLY
Align the two Buckles with the Holes, press
the two Buckles with fingers, and then insert
down into the Inner Pole until the Buckles
pop out from the Holes. (Fig. 5)
Loading ...
Loading ...
Loading ...