Loading ...
Loading ...
Loading ...
13
USER SERVICING INSTRUCTIONS
LEAKAGE AND OVERCURRENT PROTECTION
The plug of this misting fan was equipped with a leakage protection device. It
will automatically cut off the circuit if any electricity leakage happens during
operation. If this happens, examine the fan carefully to find out the cause,
contact a qualified electrician for help, if needed. You can only restart the fan
when the fault was removed. To restart the fan or every beginning of using the
fan, press the RESET button first. (Fig. 13)
WARNING: Before each use, follow below steps to check the plug. (Fig. 13)
1. Plug into proper receptacle.
2. Press RESET button, INDICATOR should be ON.
3. Press TEST button, INDICATOR should be OFF.
4. Do not use if test fails.
FUSE REPLACEMENT INSTRUCTIONS
1. Grasp the plug and remove it from the
receptacle or other outlet device. Do not
unplug by pulling on the cord.
2. Open the fuse cover. Slides open the fuse
access cover on top of attachment plug
towards blades.
3. Remove the fuse carefully. Push the fuse from the other side or turn the
fuse holder over to remove the fuse.
4. Risk of fire. Replace the fuse only with 5A, 125 Volt fuse.
5. Close the fuse cover. Slide closed the fuse access cover on top of the
attachment plug.
6. Risk of fire. Do not replace attachment plug or GFCI device. It contains a
safety device (fuse, GFCI) that should not be removed. Discard product if
the attachment plug or GFCI device is damaged.
Loading ...
Loading ...