Loading ...
Loading ...
Loading ...
Maintenance and Cleaning
Manual Defrosting of the All-Freezer
When the frost and ice layer in the freezer is 1/8” thick you should clean the beer
froster.
First, unplug the unit
Second, set the thermostat to room temperature.
Third, sop up the water with a towel as the ice melts.
Fourth, dry the walls and bottom with a towel.
Fifth, reset the thermostat to 24 F. and plug in the unit.
Cleaning the Appliance
Disconnect the power supply before cleaning the beer froster. Do not use coarse
or aggressive cleaning agents as you can damage the surface.
Clean the exterior with water and detergent. You may also use alcohol
(ethanol or isopropyl alcohol). The application of abrasive and especially
aggressive cleaners, such as stainless steel cleaners, is not appropriate for
the cleaning of plastic and coated parts.
Remove the detachable accessories in the interior of the beer froster and
clean it with water and liquid detergent. Plastic parts cannot be washed in
a washing machine.
Wash the interior of the beer froster with lukewarm water, in which you
add one or two spoonfuls of vinegar.
Every now and then wipe the condenser on the rear wall. Use a soft non-
metal brush or vacuum cleaner.
Do not forget to clean the defrost water receptacle above the beer froster
compressor (do not remove the receptacle). After cleaning, connect the
appliance to the power supply and reload the beer.
Clean the drain pan on the beer froster compressor, but do not remove the
drain pan.
After Cleaning, connect the beer froster into the power supply and reload the
beer.
Instructions for Use
Loading ...
Loading ...