Loading ...
Loading ...
Loading ...
4. INTRODUCTION
4.3 HANDLING AND STORAGE
– Care must be taken when handling this product.
● Dropping this power tool could have an effect on its accuracy and could also result in personal
injury. This product is not a toy and must be respected.
– Environmental conditions can have a detrimental effect on this product if neglected.
● Exposure to damp air can gradually corrode components.
● If the product is unprotected from dust and debris, components will become clogged.
● If not cleaned and maintained correctly or regularly, the machine will not perform at its best.
- 6 - - 19 -
11.1 MAINTENANCE
Regular inspection and cleaning reduces the necessity for maintenance operations and will keep
your tool in good working condition.
The motor must be correctly ventilated during tool operation. Avoid blocking the air inlets and
vacuum the ventilation slots regularly.
– Remove the pads when not in use to allow them to dry out.
– Clean the wool polishing pad by hand with soap and water.
11.2 TROUBLESHOOTING GUIDE
Note: Remove the battery pack before carrying out adjustment, servicing or maintenance.
Motor does not start. – Battery pack no charge.
– Battery faulty or
damaged.
– Re-charge battery.
– Replace battery.
Motor runs, but slowly/ losing
power.
– Battery pack no charge.
– Battery pack faulty or
damaged.
– Re-charge battery.
– Replace battery.
Problems Possible cause Required action
Battery pack doesn’t charge
/
non-llumination
/
non
illumination of charger.
– Fuse blown in charger
plug.
– Charger faulty.
– Replace fuse.
– Replace charger.
11. MAINTENANCE & TROUBLESHOOTING
Loading ...
Loading ...
Loading ...