User Manual - Page 10

• Donotusetappedwires,extensioncords,orstarburstconnections,astheymaycauseoverheating,electricshock,orre.

• Do not use locally purchased electrical parts inside the product. (Do not branch the power for the drain pump, etc., from the

terminalblock.)Doingsomaycauseelectricshockorre.

• Be sure to install a ground fault circuit interrupter. (One that can handle higher harmonics.)

(This unit uses an inverter. Therefore, a ground fault circuit interrupter capable of handling higher harmonics must be used in

order to prevent the ground fault circuit interrupter malfunctioning.)

• Use an all-pole disconnection type circuit breaker with at least 1/8 inch (3mm) between the contact point gaps.

• When carrying out wiring, take care not to pull at the conduit.