31-5000402 Rev. 0 03-19 GEA
Installation Instructions
for your new
RAB81
Assembly Required
RAB81B
Fully Assembled
Wall Case for All AZ Series
Zoneline Models
Before you begin - Read these instructions completely
and carefully. IMPORTANT – OBSERVE ALL
GOVERNING CODES AND ORDINANCES. Note to
Installer – Be sure to leave these instructions with the
Consumer. Note to Consumer – Keep these instructions
with your Owner’s Manual for future reference.
NOTES:
• Handle the case carefully.
• The cardboard stiffener inside the case, and the rear
protective panel must retain in place until the chassis
is installed to assure case rigidity and squareness.
• If a sub-base is to be used, it may be desirable to
assemble it to the case before securing the case in
the wall.
CRITICAL DIMENSIONS
Ceiling
“A”
“B”
“C”
Roomside
Outside
wall
“D”
)LQLVKHGÀRRURUWRSRIFDUSHW
NOTE: Care should be taken in location of electrical
supply entry in relationship to wall sleeve to ensure
access to power once the unit is installed.
Dimensions Recommended Installation Clearance
A 7RSRIFDVHWR¿QLVKHGFHLOLQJ´PLQ
B
3URMHFWLRQRIFDVHLQWRURRPIURP¿QLVKHGZDOO
ó´PLQQRVXEEDVH
Ǫ´PLQZKHQVXEEDVHLVXVHG
,IPRUHWKDQ´RIWKHFDVHSURMHFWV
LQWRWKHURRPDVXEEDVHRURWKHUVXSSRUWLV
recommended.
C 3URMHFWLRQRIFDVHWRRXWVLGH´PLQ
D
+HLJKWDERYH¿QLVKHGÀRRURUWRSRIFDUSHW
´PLQZLWKRXWVXEEDVH
´PLQ´PD[ZLWKVXEEDVH
E /HIW5LJKWVLGHRIFDVHWRDGMDFHQWZDOO´PLQ
INSTALL CASE LEVEL IN ALL DIRECTIONS
CASE LOCATION
&DVHPXVWEHORFDWHGRQDQRXWVLGHZDOOIRUSURSHU
RSHUDWLRQ$VDJHQHUDOUXOHWKHDLUFRQGLWLRQHUVKRXOG
EHFHQWUDOO\ORFDWHGLQDQRXWVLGHZDOOWRHQVXUHSURSHU
GLVWULEXWLRQRIFRQGLWLRQHGDLU,WVKRXOGEHORFDWHGLQ
DSRUWLRQRIWKHZDOOZKHUHWKHUHLVQRHOHFWULFDOZLULQJ
RUSOXPELQJDQGZKHUHWKHUHDUHQRREVWUXFWLRQV
LPPHGLDWHO\LQVLGHRURXWVLGH
)RUIXUWKHUGHWDLOVUHIHUWRWKH*($SSOLDQFHV$UFKLWHFWVDQG(QJLQHHUV'HVLJQ'DWD0DQXDOIRU=RQHOLQHV7R
REWDLQDFRS\RIWKHPDQXDOFDOO*($SSOLDQFHVDWRUYLVLWXVDW=RQHOLQHFRP
Outside wall
“E”
“E”
Top of case
Loading ...
Loading ...
Loading ...
