Loading ...
Loading ...
Loading ...
6
INSTALLATION GUIDE
USING THE APPLIANCE FOR THE FIRST TIME
1. Read the instruction manual and retain for future reference.
2. Remove all packaging materials, use a soft dry cloth to clean all the parts
before assembling the appliance.
3. Once assembled, placethe appliance on a dry, solid, level surface, and
ensure the appliance is provided with reasonable space of at least 4
inches from any objects, in order to operate effectively.
4. Check power sockets and any extension cords to confirm compliance with
appliance requirements. Ensure that the appliance is plugged in before
usage.
5. When the appliance is turned on for the first time, warm air and mineral
smell may be released from the air outlet. This is normal as catalytic
oxidation is taking place inside the NCCO Reactor.
INSTALLATION PROCEDURE
1. OPEN THE BACK PANEL
Press down and remove back panel
with both hands.
2. OPEN FILTER & NCCO REACTOR PACKS
Remove the HEPA Filter and NCCO
Reactor from their factory sealed packs.
HEPA Filter in clear plastic and NCCO
Reactor in Silver package.
3. INSTALL FILTER & NCCO REACTOR
Fit the NCCO Reactor into the bottom
of the filter cavity. Place the HEPA
Filter into the empty frame behind the
Pre-Filter with the ribbon facing out.
Install the HEPA Filter frame with the pre
-filter facing out on top of the NCCO Reactor.
WARNING
If Filter and NCCO Reactor are not properly
installed the unit will not work and alert you.
Redo the installation making sure it is done
properly and try again.
Loading ...
Loading ...
Loading ...