D-Link DCS-6113V Full HD Day & Night Vandal-Proof Dome Network Camera

User Manual - Page 48

For DCS-6113V.

PDF File Manual, 77 pages, Read Online | Download pdf file

DCS-6113V photo
Loading ...
Loading ...
Loading ...
48D-Link DCS-6112V /6113V User Manual
Conguration
Refresh: Click this button to refresh all current connections.
Add to deny list: You can select entries from the Connection Status list and add them to the Deny List to deny access. Please
note that the selected connections will only be disconnected temporarily and will automatically try to re-link again (IE Explore or
Quick Time Player). If you want to enable the denied list, please select Enable access list ltering and click Save in the rst
column.
Disconnect: If you want to break off the current connections, please select them and click this button. Please note that those selected
connections will only be disconnected temporarily and will automatically try to re-link again (IE Explore or Quick Time Player).
Enable Access List Filtering: Select this item and click Save if you want to enable the access list ltering function.
Filter Type
Select Allow or Deny as the lter type. If you choose Allow Type, only those clients whose IP addresses are on the Access List below
can access the camera, and the others cannot access. On the contrary, if you choose Deny Type, those clients whose IP addresses
are on the Access List below will not be allowed to access the camera, and the others can access.
Filter
Then you can add a rule to the following Access List. Please note that the IPv6 access list column will not be displayed unless you
enable IPv6 on the Network page. For more information about IPv6 Setting, please refer to Enable IPv6 for detailed information.
There are three types of rules:
Single: This rule allows the user to add an IP address to the Allowed/Denied list.
Network: This rule allows the user to assign a network address and corresponding subnet mask to the Allow/Deny List.
Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List (This rule is only applied to IPv4).
Administrator IP address
Always allow the IP address to access this device: You can select this item and add the Administrator’s IP address in this eld to
make sure the Administrator can always connect to the device.
Loading ...
Loading ...
Loading ...