Loading ...
Loading ...
Loading ...
10
Required accessories and tools
Supplied accessories
Installation instructions
Operating instructions
Installation kit
Optional accessories
Sealing Kit for Side-by-Side Installation BSEALKIT10
For permanent connection of two individual appliances,
e.g. Freezer next to Refrigerator.
Freedom
Heater Kit for Side-by-Side Installation
XHEATKIT10
If the gap between the appliances is less
than 6" (160 mm).
Panel unification part (Metal strip) FPCONNTS10
For connection of two door panels. Can be used
for standard height door panels without further
preliminary work.
Other required accessories
Ice maker installation kit
1
/
4
" OD copper line
For connecting appliances which require water,
e.g. for an ice maker.
Maximum outer diameter of the water pipe
(without fittings):
13
/
32
" (10 mm).
Other
Stepladder
Dolly, hand truck
Hammer drill for drilling holes in wall or floor
Bits according suitable for material and in different
sizes
Wooden beam (cross section min. 3" x 4") as an
alternative tip protection, length according to the
width of the installation enclosure
Wooden screws in different sizes
Thin plywood sheet, particle board or cardboard to
protect the floor from damage
Suitable material for covering and protecting
furniture (e.g. protective sheets)
Adhesive tape
Note:
Before using, check whether the removed adhesive
tape leaves adhesive residue on the work surfaces!
Otherwise do not use on high-quality work surfaces.
Tools
Cordless screwdriver
Torx bit T20 + magnetic
holder
Torx screwdriver T20
5
/
16
" (8 mm) hex nut driver
Wood drills in different sizes
Open end wrench
1
/
2
"
(SW 13 mm)
Multigrip pliers
Adjustable wrench
Cutter with adjustable blade
Metal tape measure,
folding rule
Square
Level, length 2' (60 cm) and
4' (1,2 m)
Loading ...
Loading ...
Loading ...