Loading ...
Loading ...
Loading ...
SECTION 3 - OPERATING INSTRUCTIONS
3.12.1 ADJUSTING BLADE ON CUTTER SPINDLE
(Continued)
CUTTER SPACERS
HOUSING t!l_ _ ON TOP
_......--,
PULLEY ._... ,....,,,.,,,,,,....._
CUTTER
I t" HOUSING
r.=,,,,,.==_ SPACERS ON
BOTTOM
u_
FIGURE 3.15
3.13 ADJUSTING FIXED DECK ATTACHMENT
The mower deck has four different positions for attaching
it to the power unit. The lowest setting provides a cutting
height range of 1-1/2" to 2-1/2", the middle low cut is 2-
1/4" to 3-1/4", the middle high cut is 3" to 4", and highest
cut is 3-3/4" to 4-3/4". Make sure the spacers on the
caster wheels are moved up or down as shown to
correspond with the bolt )ositions to keep deck level.
Once a desired cutting height is reached, attach the
mower deck to the power unit by installing 3 bolts on
each side in selected height of cut holes. Tighten bolts to
70 to 80 foot pounds torque. See Illustration.
SIDE PROFILE OF UNIT
BLACK DOTS
REPRESENT
POWER
BOLT
UNIT _ ANCHOR
u._
• REAR
FIGURE 3,16A: LOW CUT 1-1/2" TO 2-1/2"
FIGURE 3.16B: MIDDLE LOW CUT 2-1/4" TO 3-1/4"
SPACERS
FIGURE 3.16C: MIDDLE HIGH CUT 3" TO 4"
SPACERS
FIGURE 3.16D: HIGH CUT 3-3/4" TO 4-3/4"
FIGURES 3.16C-D
FIGURES 3.16A-B
14
Loading ...
Loading ...
Loading ...