Loading ...
Loading ...
Loading ...
l_2r_[_[_[ol#Dlll_[oldlnDI¢[oli
Press VOLUME +/- to adjust the volume
level.
[1110
SURROUND CLEARV01CE UNJVOLUNE DTS
[] [] [] []
Up .......
_" Down
The color of FII'ID DTS inclicator changes depending on
the adjustable range. Green indicates a lower volume
level, orange a moderate level, and red a higher leveh
Note that when the FlrlD DTS indicator is red, the volume is
set to a higher level. Excessive sound may damage your
hearing or bother others.
\ll
..-@-_
To turn off the volume temporarily, press MUTE
MUTE.
To resume the volume, press MUTE again or
press VOLUME +_.
Press SUBWOOFER +/- to adjust the bass
level.
The color of lIPID DTS indicator changes depending on
the bass level. Green indicates a minus level, orange a
standard level (default value is 0), and red a plus level.
You can use 1his function to delay sOUnLIto synchronize
with a lagging video image.
1 Press and hold AUDIO DELAY
more than 3 seconds to enter
D[LAY
adjustment mode.
2
D[10
iNPUT SURROUND CLEAR VOICE UNIVOLNNE DT8 D[I PL_
..m.. [] [] [] [] []
Flashes in green (_, P. 11)
Press SUBWOOFER +/- to adjust the
delay time. (+ increases the delay time)
IXIR
iNPUT SURROUND CLEAR VOICE UNiVOLDME OTS DO PLO
..Ill. [] [] D D []
Make the delay time longer
Make the delay time shorter
The color of lIPID DTS indicator changes depending on
the adjustable range. Green indicates a shomer delay time,
orange a medium delay, and red a longer delay.
3 Press AUDIO DELAY to exit the
adjustment mode.
\1/
The adjustment mode is canceled if"the unit is ]eft for 20
secondswithout any operation being performed.
Although the unit has a subwoofer built-in, you can use
commercially available powered subwoofcr of your
choice. Refer to "Alternative connections" (_ P. 5).
1 Set the unit to standby mode.
2 Press both the VOLUME - button and
button of the main unit, release the (_
button first, then release the VOLUME -
button.
This unit is turned on when switching between the
built-in subwoofcr and external subwoolbr.
The SURROUND indicator lights up as the following
illustration. Check if the setting is correct. (_, P. 11)
NNtn
The SURROUND
indicator (for 2 SURROUND SURROUND
seconds after Ihe %m,. []
unil is turned on)
Green No light
• The default setting is playback of the built-in
subwoofcr.
• You can verify the current setting by turning the
unit on again from standby mode.
You cannot use the built-in subwoofer and the external
subwoofer simtlltaneousl.v.
SEn
Loading ...
Loading ...
Loading ...