Loading ...
Loading ...
Loading ...
English
English 33
Installation check codes
Check code Meaning Solution
No problems
detected
Vent condition is good.
Vent is nearly
clogged
Over 80 % of the vent is clogged.
(This may lead to poor drying
performance or cause malfunction)
1. Clean the lint filter.
2. Check your vent condition. (Refer to
the “Ducting requirements” section)
* You must take measures (such as
cleaning) through expert personnel.
Leave the dryer at
room temperature
The internal temperature of the dryer is
too low (below 32 °F (0 °C)) or too high
(over 104 °F (40 °C)) and therefore vent
blockage cannot be detected.
Leave the dryer at room temperature
(41~95 °F (5~35 °C)) for an hour and
check again.
Items detected in
the drum
Unit is detecting items inside the drum
or there is an error on the dry sensor.
Remove items from the drum and check
again.
If the problem continues, contact a
service center.
NOTE
For other information codes, see the “Troubleshooting” section on page 59.
Untitled-2 33 2021-05-25 3:49:23
Loading ...
Loading ...
Loading ...