Loading ...
Loading ...
Loading ...
TROU BLESHOOTING CHART
PROBLEM CAUSE
Poor cut- uneven 1.
2,
3_
Excessive
vibration
Starter rope hard
topull
Grass catcher
notfilling (ifso
equipped)
Hard to push
2o
Wom, bent or loose blade.
Wheel heights uneven.
Buildup of grass, leaves
and trash under mower_
Worn. bent or loose blade.
Bent engine crankshaft°
1.
.
3_
4o
Engine flywheelbrake is on
when control bar is released,
Bent engine crankshaft.
Blade adapter broken.
Blade dragging in grass.
1. Cutting height too low.
2. Lifton blade wom off.
3, Catcher not venting air.
1. Grass istoo high or wheel
height istoo Iowo
2o Rear of lawn mower
housing or blade dragging
in grass°
3. Grass catcher too full.
4. Handle height position not
rightfor you,
CORRECTION
1. Replace blade. Tighten
blade bolt.
2. Set all wheels at same
height
3. Clean underside of
mower housing.
1. Replace blade. Tighten
blade bolt.
2. Contact an authorized
service center.
1. Depress control bar to
upper handle before
pulling starter roper
2. Contact an authorized
service center.
3. Replace blade adapter.
4. Move lawn mower to cut
grass or to hard surface
to start engine
1o Raise cutting height.
2. Replace blade.
3. Clean grass catcher.
1. Raise cutting height.
2. Raise rear of lawn mower
housing one (1) setting
higher.
3. Empty grass catcher.
4. Adjust handle height to
suit.
16
Loading ...
Loading ...
Loading ...