Loading ...
Loading ...
Loading ...
20
21
22
6. Hold the chain and bar.
7. Put the chain loop around the sprocket (18).
8. Make sure the chain tension pin hole (19) on the guide
bar fits correctly with the bolt.
18
19
9. Install the chain cover.
10. Tighten the chain. Refer to Adjust the chain tension.
11. Tighten the chain cover knob when the chain is correctly
tensioned.
NOTE
If you start the chain saw with a new chain, have a test for
2-3 minutes. A new chain gets longer after the first use,
examine the tension and tighten the chain if necessary.
7.4 FIT THE POLE SAW
13
5
5
6
12
1. Mount the pole saw head (12) on pole saw handle (13) to
achieve the standard length.
2. Slide the collar (5) upwards.
3. Turn the collar clockwise to tight it.
7.5 EXTENSION OF THE POLE SAW
1. Fit the extension pole between the polesaw handle and
the polesaw head to achieve the maximum length.
2. Slide the collars upwards.
3. Turn the collars clockwise to tighten them.
WARNING
Periodically check the tightness of the connection of the
collars.
7.6 CUTTING PREPARATION
Before you start to cut, make sure that
• Wear heavy gloves for maximum grip and protection.
• Maintain a proper grip on the machine during operation.
• Use your right hand grip on the rear handle while
your left hand grip on the pole shaft.
• Keep your body to the left of the chain line.
• Never use a left-handed (cross-handed) grip, or any
stance that places your body or arm across the chain
line.
• Never stand directly under the limb you are cutting.
• Periodically examine the tightness of the collars during
operation.
8
English
EN
Loading ...
Loading ...
Loading ...