Loading ...
Loading ...
Loading ...
Installation
4
EN
WARNING!
Read this manual carefully before installing and/or using the hood.
• The manufacturer will not be held liable for damage resulting
from incorrect or improper installation.
• Installation and adjustments should be carried out by qualified
personnel.
• Check the integrity of the hood once it has been removed from
the packaging. If the product is damaged, do not use it. Contact
the SMEG assistance service.
• Before connecting the appliance, make sure that the mains
voltage is the same as the voltage indicated on the technical data
label inside the appliance.
• For Class I appliances, make sure that the domestic power supply
is suitably earthed.
• The minimum distance between the lower surface of the hood
and the hob must be at least 650 mm for gas appliances and 450
mm for electric or induction appliances.
• The air that is extracted must not be conveyed into a duct that is
used for extracting fumes from appliances powered by gas or
other fuels.
• Connect the air outlet from the hood to fume extraction ducts
that have an adequate internal diameter, not less than 120 mm.
• There must be adequate aeration in the room when the hood
and gas appliances are operating at the same time.
• If the power cable is damaged, it should be replaced by the
manufacturer or by his technical assistance service or anyway by
a similarly qualified person in order to prevent possible hazards.
Loading ...
Loading ...
Loading ...