Loading ...
Loading ...
Loading ...
Instructions for use
27
Button functions
_______________________________________________________
Hood OFF button. (If the fan and the lights are on).
Speed 1 button. Lights up when the motor is running at speed 1.
Speed 2 button. Lights up when the motor is running at speed 2.
Speed 3 button. Lights up when the motor is running at speed 3.
Turbo speed button. Lights up when the motor is running at speed 4. The motor
switches from speed 4 to speed 3 after about 7 minutes. When the Turbo
function is active, the button flashes and the timer function is not active.
24h air exchange function button. Lights up when the motor is running at speed
1. Briefly touching activates motor speed one and extracts air for 10 minutes
every hour for 24 hours. Press the button again to disable it.
Automatic switch-off button. The button is illuminated while the fan is in
operation at the selected speed (1-2-3). Briefly touching activates the
automatic switch-off delay of 15 minutes. Suitable for eliminating residual
odours. It can be activated at fan speeds 1, 2 or 3. It is disabled by pressing the
button or by switching off the fan.
Filter alarm reset button. The alarm is activated after 100 hours of actual hood
operation. When the filter alarm is on, pressing the button for about 3
seconds resets the alarm. If there is no filter alarm, pressing the button has
no effect (apart from the light colour temperature adjustment function below).
Before resetting the alarm signal, the activated charcoal filters have to be
replaced and the metal grease filters should be cleaned.
Lights On/Off button. Illuminated when the light is on.
- - Pressing these buttons twice activates the timer. The timer function
can only be activated when the fan motor is on. Once activated, a 10-minute
timer starts, when the time elapses, the motor stops and the light switches off.
The button flashes during this time. The timer can be cancelled by touching the
same button.
EN
Loading ...
Loading ...
Loading ...