Loading ...
CIRCUIT INFORMATION
A circuit diagram is included on the switch case labeling each
of the terminals. The normal position corresponds to the switch
plunger in its released position.
SOLDERING GUIDELINES
When hand soldering the switch’s terminals, do not exceed
five seconds at 350°C [662°F]. Contacting the switch housing
with the soldering device may damage the switch housing.
Solder joints must not be moved for at least one minute after
soldering.
Do not try to clean the switch with a solvent or similar
substance after the soldering process.
ENVIRONMENTAL OPERATING
CHARACTERISTICS
TABLE 2. SPECIFICATIONS
Operating
temperature
range
“S” Grade: 25°C to 85°C [13°F to 185°F]
“T” Grade: 25°C to 125°C [13°F to 257°F]
Humidity Validated to 240 hours at 40°C, 95 %RH
Rate of
actuation
0,1 mm/s to 1000 mm/s
Operating
frequency
(electrical)
25 operations/minute max.
Operating
frequency
(mechanical)
60 operations/minute max.
MICRO SWITCH ORIGINAL TECHNOLOGY BASIC SWITCH,
V19 SERIES SWITCHES
Issue B
32348648
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship during the appli-
cable warranty period. Honeywell’s standard product warranty
applies unless agreed to otherwise by Honeywell in writing;
please refer to your order acknowledgement or consult your
local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge
those items that Honeywell, in its sole discretion, finds defec-
tive. The foregoing is buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
While Honeywell may provide application assistance personally,
through our literature and the Honeywell web site, it is buyer’s
sole responsibility to determine the suitability of the product in
the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this writing.
However, Honeywell assumes no responsibility for its use.
FOR MORE INFORMATION
Honeywell Sensing and Internet of Things services its custom-
ers through a worldwide network of sales offices and distribu-
tors. For application assistance, current specifications, pricing,
or the nearest Authorized Distributor,
visit sps.honeywell.com/ast or call:
USA/Canada +302 613 4491
Latin America +1 305 805 8188
Europe +44 1344 238258
Japan +81 (0) 367307152
Singapore +65 6355 2828
Greater China +86 4006396841
32348648BEN | B | 07/21
© 2021 Honeywell International Inc. All rights reserved.
Honeywell Advanced Sensing Technologies
830 East Arapaho Road
Richardson, TX 75081
sps.honeywell.com/ast