Loading ...
Loading ...
Loading ...
6
8 LOCATION OF PRODUCTS INTO ALCOVE — RIGHT PRODUCT
1
Roll the right hinge product into the right hand side of the alcove until the product makes
contact with the joiner bracket.
IMPORTANT!
For flush installation: check for flushness of the product with the surrounding cabinetry
(refer to separate ‘Installation instructions’ booklet supplied with your appliance) on
how to achieve flushness.
2
Adjust the product height (refer to separate ‘Installation instructions’ booklet supplied with
your appliance).
3
Screw two M5 x 12 Socket head cap screws to connect the alcove bracket to the joiner
bracket (refer to A).
4
If the product is not flush, further loosen the top screws of the alcove attachment bracket
if required and move the bracket in a forward to back motion to suit (refer to B).
5
Recheck product flushness (refer to separate ‘Installation instructions’ booklet supplied
with your appliance). Once satisfied with flushness, tighten top screws fix an additional
#8 x 16 mush washer screw (refer to C).
A
C
B
Loading ...
Loading ...
Loading ...