Loading ...
Loading ...
Loading ...
9
!1 ATTACHING THE CENTER TRIM AND TOE KICK
IMPORTANT!
Open both refrigerator doors.
1
Bring the center trim in front of
the gap between the two products
(refer to A).
2
Starting from the upper spring clips, squeeze the clips to
slot between the two products (refer to B).
3
Repeat on the middle and then the lower clips.
4
Using the palm of your hand, push trim all the way down
the length of the product.
C
B
6
Installing toe kick
Unscrew the toe kick bracket screws mid-way, and bring forward (refer to D and E).
Repeat this process for both products.
5
Screw the M8 set screw into the threaded hole of the
bottom joiner bracket to support the middle trim. This
maintains the height position of the trim. Once you are
satisfied with the location of the middle trim, use the M8
nut to lock the set screw into location (refer to C).
7
Place toe kick over the brackets and position
the outer brackets until flush with surrounding
cabinetry. Use the folded edge of the supplied
toe kick or another suitable straight edge
to align the inner brackets. Once satisfied,
remove the toe kick.
8
Tighten the toe kick bracket screws to lock brackets into position and remove the backing
from the Velcro strip (refer to F). Attach the toe kick to the adhesive surfaces.
A
F
D
E
Loading ...