Loading ...
Loading ...
- 2 -
SPECIFICATION
The Draper Tools policy of continuous improvement determines the right to change
specification without notice.
Stock No. ......................................................................................................................... 88988
Part No. ............................................................................................................................ DMSD
Detection Distance:
Stud ..................................................................................................................... 19.05mm
Distance ......................................................................................................... 0.60-15.24M
Accuracy ............................................................................................................. ±0.5% ±1 Digit
Resolution .................................................................................................................. 0.01M (1")
Aperture Angle (approx.) ......................................................................................................... 5°
Laser Diode Type ................................................................................................... 650nM Diode
Laser Class ..................................................................................................................... Class 2A
Power Source* .............................................................................................................. 9V (PP3)
Weight .......................................................................................................................... 0.192kg
Operating Temperature ........................................................................... 32°F-104°F (0°C-40°C)
* Draper Stock No.62044
ASSEMBLY
- BATTERY INSTALLATION: (FIG.1)
When the battery power starts getting low a
battery symbol will appear on the display.
Slide out battery door $ located at the rear
of the unit. Connect a new 9V PP3 battery*
(not supplied) into the battery compartment
and ensure the correct polarity. Replace cover
$ and securely clip in place.
* Draper Stock No.62044
1. DO NOT shine or aim the laser pointer at people or animals, as it may cause damage to
eyesight.
2. The combined stud/distance detector is a precision instrument which must be handled with
care.
3. Avoid shock, vibrations and extreme heat.
4. Avoid dust and water, which may obstruct the lens. If needed, use a soft cloth to clean the lens.
5. Keep the laser tool dry and clean.
6. Check battery regularly to avoid deterioration.
7. Remove battery if the laser tool is to be stored for an extended period of time.
CARE AND HANDLING
FIG.1
$
Loading ...
Loading ...
Loading ...