Loading ...
Loading ...
Loading ...
7 US
01 06
PUTTING INTO OPERATION
01 Unpack the appliance and set it up. Open the fragrance/lter compartment
3+7, remove the pre-lter 5+10, the VENTAcel lter 6+11 and fragrance 8
and unpack them.
02 Re-insert the VENTAcel lter 6+11 and pre-lter 5+10.
03 Inserting the fragrance: Twist open the fragrance cap and insert it into the
fragrance holder 9. Insert up to three fragrances into the fragrance holder
4+9.
04 Close the fragrance/lter compartment 3+7.
05 The display 1 can be adjusted to three positions.
06 The power cable can be adjusted to the desired length by winding it up in
the cable compartment 12
Attention! Make sure that the appliance is switched o and the power
cord is disconnected.
Attention! The coupling of the mains cable must be plugged rmly into the
device!
Please remove the protective foil for
battery and remote control.
Connect the power cord and switch
on the appliance at the on/o switch
2 or with the remote control 13.
Set fan stage
ON/OFF
Loading ...
Loading ...
Loading ...