Loading ...
Loading ...
Loading ...
Careof YourOpener
LIMIT AND FORCEADJUSTMENTS:
Weatherconditions may cause some
minor changes in door operation
requiring some re-adjustments,
particularly during the first year of
operation.
Pages27 and 28 refer to the limit
and force adjustments. Only a
screwdriver is required. Followthe
instructions carefully.
Repeatthe safety reverse test
(AdjustmentStep3, page29) after
any adjustmentof limits or force.
FORCECONTROLS
LIMIT CONTROLS
e o]t®
MAINTENANCESCHEDULE
EveryMonth
• Manually operate door. If it is unbalancedor binding, call a
trained door systems technician.
• Checkto be sure door opens & closes fully. Adjust limits
and/or force if necessary(see pages 27 and 28).
• Repeatthe safety reversetest. Make any necessaryadjustments
(see Adjustment Step 3).
Every Year
• Oil door rollers, bearings and hinges. The opener does not
requireadditional lubrication. Do not greasethe door tracks.
THEREMOTECONTROLBATTERY
To prevent possible SERIOUSINJURYor DEATH:
• NEVERallow small children near batteries.
• If battery is swallowed, immediately notify doctor.
To reduce risk of fire, explosion or chemical burn:
• ReplaceONLYwith 3V2032 coin batteries.
• DO NOTrecharge,disassemble, heat above 100° C (212 ° F)
or incinerate.
The lithium battery should produce
power for up to 5 years.
To replace battery, use the visor clip or
screwdriver bladeto pry openthe case
as shown. Insert battery positive side up
(+).
Dispose of old battery properly.
Open this end_
first to avoidJ_.._ j-_
cracking _ _Z_-_J
house-
Replacethe battery with only 3V2032 coin cell batteries.
NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this
receiver and/or transmitter are prohibited, except for changing the code setting or replacing the
battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
32
Loading ...
Loading ...
Loading ...