Loading ...
Loading ...
Loading ...
8. Additional Water Timer Features
Your timer has the ability to allow you to manually
water without disturbing the programmed schedule.
Manual is used to test equipment, run an extra watering
cycle in an area, or to use the hose faucet without
removing the timer.
Click the button to activate manual watering.
Using the app you can click(Le Time)set how
long ou want the preset manual cycle to run for.
Manually start the timer, the default time is 10 minutes.
Smart water timer with wifi hub can be used with Alexa
and Google Assistant. You can find the instructions via
the below steps:
2. If you works with Google Assistant, please follow with the
below command.
①Ok, Goolge. What is the <DEVICENAME> battery level?
②Ok, Goolge. start<DEVICENAME>
③Ok, Goolge. stop<DEVICENAME>
3. If you works with Amazon Alexa, please follow with the
below command.
①Alexa, what is battery on <DEVICENAME>
②Alexa, open <DEVICENAME>
③Alexa, close <DEVICENAME>
④Alexa, is <DEVICENAME> open?
1. Click the "Me" --- "Alexa icon and Google Assistant" ---
"View more ways to link" --- "Instructions", same way as
Google Assistant.
6. Meet the Diivoo App Home Screen
7. Amazon Alexa and Google Assistant
Setting
Weather
Battery Life
Next Schedule
Last Irrigation Time
Manual Watering Function
Rain Delay
Timing
Irrigation Record
Remote Control
Click the and button to add a watering
scheduel.
1
You can stop the flow of water at any time whether it is
during manual watering, or during a programmed time.
Click the button once to stop watering.
A3:
If your are gravity feed system such as rain barrel
system, then it won't work and will keep low water
pressure. Gravity feed has no real pressure when
dealing with a rain barrel. It needs pressure
measuring.
The timer have 1 year warranty since the day of
purchase. If you have any questions, please feel
We will follow up and respond within 24 hours.
The following conditions are not included,
Problems occur due to its use for other purposes,
or improper use or use of components not supplied
by Diivoo.
Damages caused by improper use, for example,
wrong of power supply, artificial damage, etc.
Q3: Why is the water timer out of little water?
A4:
Please confirm that the device is in connecting
mode.(The indicator light of EZ mode flashes every
0.5 seconds; while the one for AP mode flashed slowly.)
Please confirm that the operation on the APP is the
same as the connecting mode of the device.
Please confirm that the WiFi network is 2.4Ghz.
Please confirm that the password is correct.
Q4: The reasons for failed connection
10. Support
9. Troubleshooting
A1:
Programming is incorrect
Water pressure is too low
Particles of dirt or debris stuck in valve
More than one start time is programmed
with overlapping schedules
Manual watering is on
Faulty valve
The batteries were low
The faucet is off.
Q1: Why the Bluetooth water timer didn't turn
on/off at preset time?
A2:
The Bluetooth of water timer is currently in sleep
mode, please wait 5-10 seconds, the device will
automatically reconnect. Or scroll down to refresh
the home page of the APP, or disconnect the Bluetooth
from your phone and turn it on again.
If the device has been connected by other mobile
phones, please disconnect first.
Make sure the device battery is charged, because the
Bluetooth distance is limitedplace the phone as close
to the device as possible.
Please note that you don't need to stay connect
once you setup your schedule. The device will always
keep your watering settings and work automatically
according to the schedule.
Q2: Why Bluetooth dropping connection
2
Two irrigation modes:
Normal Scheduel: Water for a particular period in
a day. At this mode, you can:
Select (Start time)to decide when you want the device
to start watering .
Select(Irrigation Duration)choose the time of day
you want to watering.
Select days of the week to decide which day or
days you want watering.
Select (Start time)to decide when you want the device
to start watering and Select (End time)to stop watering.
(Cycle Duration)Determine how long to water.
(Pause Duration) Set the pause time.
Select days of the week to decide which day or days
you want watering.
Cycle/Soak: Water for a certain period for several
time in a day. At this mode, you can:
Normal Scheduel Cycle/Soak
There is a default name of the device. You can edit the
device name by yourself. And if you use the incorrect
command, it will not work.
Note:
The rain delay function allows you to postpone watering
for 24h, 48h or 72h due to rain or when the ground is
already wet.
Click the button to activate manual watering.
Using the app you can click set how long you want
the preset rain delay feature .
1 Manual Watering
2
Stop Watering
3
Rain Delay Function
Loading ...
Loading ...
Loading ...