Loading ...
Loading ...
Loading ...
4
warning
• Clean the vent only in the manner specified.
• To avoid dangerous fumes or damage to your vent’s
surfaces, use only the types of cleaning solutions
specified in this manual.
• To avoid personal injury, turn off the range and vent
and make sure all surrounding surfaces are cool
before cleaning.
• Always wipe stainless steel (silver colored) surfaces
with the grain. To prevent scratching, do not use
abrasive cleaners or scrubbers on stainless steel
surfaces.
• To avoid damage to the fan, do not reinstall
damaged filters.
• To avoid damage, do not clean the filters in a
dishwasher.
Cleaning the Top Cap
Clean the top cap only when the intake vent is in the low-
ered position.
Gently wipe the top cap surfaces with a sponge or soft
cloth moistened in a mild detergent solution whenever
they becomes soiled. Avoid introduction of moisture into
the switch area.
Care and Cleaning
Cleaning the Filters
Clean the lters and surrounding areas regularly to pre-
vent grease build-up.
1. Raise the vent to the “up” position to clean the lters.
2. To remove the intake lters, gently grasp each lter
on both ends and push down.
3. Pull the top of the lter out toward the front of the
unit, then pull up.
4. After removing the lters, wipe all surrounding areas,
external and internal, with a sponge or cloth moist-
ened with a mild detergent. Rinse off the surrounding
areas with water. Remove all moisture by wiping with
a soft, dry polishing cloth.
5. Hand-wash the lters in hot water with mild detergent
solution.
6. Dry the lters completely before re-installing them.
Top cap
Filter
removal
Loading ...
Loading ...
Loading ...