Loading ...
Loading ...
Loading ...
Page 11
OPERATION
3. Slide the upper pole down to decrease
the length. Slide the upper pole up to
increase the length. Adjust the length
according to your need.
4. Rotate the threaded sleeve in the
direction marked with “
” on the lower
part of the sleeve to tighten the sleeve.
AUXILIARY HANDLE
ADJUSTMENT (FIG. 4)
FIG. 4
45°
Auxiliary
Handle
Handle
Knob
Upper Pole
1. Stop the tool and remove the battery.
Wait until the auger comes to a complete
stop.
2. Unlock the auxiliary handle by turning
the handle knob counterclockwise.
Rotate the auxiliary handle to a
comfortable operating position
(45°, 90°, and 135°). 0° and 180°
positions are used for storage to save
the space.
3. Slide auxiliary handle along the pole as
needed to desired location.
4. Lock the handle by turning the handle
knob clockwise.
NOTICE: In order to prevent the auxiliary
handle from moving around or sliding on
the pole, be sure to tighten it securely.
STARTING THE TOOL (FIG. 5)
FIG. 5
Trigger
Switch
Lock-Off
Button
1. To start the tool, push and hold the
lock-off button from the either side of
the handle and then squeeze the trigger
switch with your fingers.
2. Once the tool powers on, you can
release the lock-off button and proceed
with operation.
3.
To stop the tool, release the trigger switch.
OPERATING TIPS
WARNING:
Make sure that the
area to be shoveled is free of stones,
sticks, wires, gravel, and other objects that
could be accidentally thrown by the snow
shovel in any direction and cause serious
personal injury to the operator and others.
1. Start the cordless snow shovel. Push
the shovel forward at a comfortable
rate, yet slow enough to clear the path
completely. The clearing width of the
snow shovel and the depth of snowfall
should dictate your forward speed.
2. Direct the snow discharge to the right or
to the left by holding the cordless snow
shovel at a slight angle.
3. To remove snow most efficiently, throw
the snow downwind and slightly overlap
each swath.
4. When clearing deeper drifts, hold the
cordless snow shovel by the upper and
auxiliary handles and use a swinging or
sweeping motion.
5. When finished, allow the tool to run for
several minutes to allow all snow to
clear the auger before storing.
6. Remove the battery pack after using the
cordless snow shovel.
Loading ...
Loading ...
Loading ...