Loading ...
Loading ...
Loading ...
Setting
Operating the Triple Surface Element
The cooktop is equipped with a Triple radiant
surface element located at the right front cooktop
position (Figures 1& 2). Indicator lights on the
control panel at that position are used to indicate
what portions of the Triple radiant element will heat.
The 0 light indicates that only the inner element
will heat. The @ light indicates that both inner and
double elements will heat together. The _d_light
indicates that all 3 portions of the element will
heat. You may switch between all of these different
settings at any time during cooking.
Surface Controls (cant'd)
©
_i E_m_nt il
To Operate the Triple Surface Element:
1.
2.
.
4.
Fig. 1 - 30" Model
Fig. 3
Place correctly sized cookware on the radiant surface element.
Touch and hold the (!_il);_key pad until a beep sounds. The
PowE_
power indicator light will turn ON. Note: If no key pad is
touched within 10 seconds the request to Power ON the
cool<top will clear.
ON
Touch the pad for the Triple element position until a beep
is heard. The display will show ....
Note: If no further pads are touched within 10 seconds the
request to power the element ON will clear.
Select the 0 (See Fig. 3), @ (See Fig. 4) or G) 3 elements (See
Fig. 5) to heat by pressing the s_,o pad once, twice or three
Fig. 2 - 36" Model
©
o
OOO
O •
Fig. 4
Lo
Fig. 6
o
Fig. 5
t _,
iiE,ementiii
Size
_[1_'_]_ Radiant surface elements have cooled after have been turned off. The surfacemay appear
to
they glass
may
stlil be hot and burns may occur if the glass surface istouched before it has cooled sufficiently.
_[_'_'_J_ Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the
range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too
close to the surface elements.
Do not allow aluminum foil, or ANY material that can melt to make contact with the ceramic glass
cooktop. If these items melt on the cooktop they will damage the ceramic cooktop.
times (Figures 5 & 6 show indicator lights with ALL 3 elements selected).
_ Lo
5. Touch HI Hi pad once to turn QN the power level to HI. Touch Lo v pad once for Lo (See Fig. 6).
Lo
6. Each touch of the Hi or Lo v pad will decrease or increase the power level from 9.5 through 3.0 by .5 increments.
Simmer power levels between 3.0 and 1.2 will decrease or increase by .2 increments. Lo is the lowest power level
available. Note: The power level may be adjusted at any time while the element is ON.
Z Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. Each surface
element provides a constant amount of heat at each setting. A glowing red surface heating area extending beyond the
bottom edge of the cookware indicates the cookware is too small for the surface heating area.
8. When cooking has been completed touch the pad once to turn the element OFF and if no other surface element is
used touch the ;_;':d_key pad to turn off the cooktop.
Note: The lie (hot element) message will remain ON if the cooktop is still hot and will remain ON until the heating
surface area has cooled sufficiently.
Loading ...
Loading ...
Loading ...