Loading ...
Loading ...
Loading ...
Setting Surface Controls (cont'd)
Operating Single Radiant Surface Elements
The cooktop has 4 SINGLE radiant surface elements: the RIGHT REAR, LEFT REAR, CENTER REAR and the LEFT FRONT
positions (Fig. 1 & 2).
To Operate the Single Radiant Surface Elements:
1, Place correctly sized cookware on the radiant surface element.
2. Touch and hold the _(_!i key pad until a beep sounds. The power indicator light will turn ON.
Note: If no key pad is touched within 10 seconds the request to Power ON the cooktop will
clear.
.........S_
3. Touch the pad for the desired element position until a beep is heard. The display will
show "-J'. Note: If no further pads are touched within 10 seconds the request to power the
element ON will clear.
L©
4. Touch/\ pad once to turn ON the power level to Hi (See Fig. 3). Touch v pad
H
once for Lo.
/_, Lo
5, Each touch of the Hi or v pad will decrease or increase the power level from
9.5 through 3.0 by ,5 increments. Simmer power levels between 3.0 and |.2 will
decrease or increase by .2 increments. Lo is the lowest power level available. Note:
The power level may be adjusted at any time while the element is ON.
6. Start most cooking operations on a higher setting and then turn to a lower setting
to finish cooking. Each surface element provides a constant amount of heat at
each setting. A glowing red surface heating area extending beyond the bottom
edge of the cookware indicates the cookware is too small for the surface heating
area,
ON
7, When cooking has been completed touch the pad once to turn the element
OFF and if no other surface element is used touch the ,:!:_:_!key pad to turn off the
Pow_
cool<top.
Note: The HE (hot element) message will remain ON if the cooktop is still hot and
will remain ON until the heating surface area has cooled sufficiently.
Fig, 1 - 30" Model
Fig. 2 - 36" Model
000
0 0
Fig, 3
Hi
Lo
V
_ Radiant surface elements have cooled after have been turned off:. The surfacemay
appear
to
they glass
may
still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.
_Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the
range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too
dose to the surface elements.
Do not allow aluminum foil, or ANY material that can melt to make contact with the ceramic glass
cooktop. If these items melt on the cooktop they will damage the ceramic cooktop.
10
Loading ...
Loading ...
Loading ...