Loading ...
Loading ...
Loading ...
Installation Instructions
B REVERSING THE DOOR SWING (CONT.)
[] REHANGING THE DOORS
6.1 Rehang the fresh food door
6.1.1 I,ower the fl'esh food door onto the
botton_ hinge pin. Be sure the washer
is in place on the pin.
I
Washer Hinge
Bracket
Modelswith a hingebracket
thathas2screwholes.
Plastic
Washer
Hinge-_
Modelswith a hingebracket
thathas4screwholes.
6.1.2 Insert the pin on the center hinge into the
socket in the top of the door. Place the
space_; then the washe_; on the hinge pin.
NOTE: The center hinge must be turned over
as shown when mounted on the left side.
HingePin
PlasticWasher
andSpacer
6.1.3 Tilt the door toward the cabinet. As the door is
brought into position, slide the hinge under the
head of the screw which earlier had been partly
driven into the outermost hole. Insert the
remaining screw, then tighten both screws
securely.
[]REHANGING THE DOORS (CONT.)
6.2 Rehang the freezer door
6.2.1 I,ower the freezer door onto the center
hinge pin. Be sure the washer and spacer
are in place on the pin.
5/
CenterHingePin;
PlasticWasher
andSpacer
6.2.2 Tilt the door toward the cabinet, lifting the top
hinge so the pin fits into the socket on the top
of the door.
6.2.3 Make sure the door is slightly above the top of
the cabinet and the gap between the doors is
even across the front. Tighten the top hinge
screws. Do not overtighten these screws--
tighten them tmtil they are just snug, then turn
them another one-half turn.
22
Loading ...
Loading ...
Loading ...