Loading ...
Loading ...
Loading ...
7
GETTING STARTED
USING THE DISHWASHER
Select Options
The light by the selected pad will be lit to indicate which Option has been selected.
Normal
Temp
This option is for normally soiled dishes, optimizes wash performance while conserving energy.
Boost
Temp
This option increases the temperature to help clean heavily soiled dishes and will increase the cycle
time by 20 to 50 minutes. Option may be turned On or Off during the wash cycle. This option will
also improve dry performance on the Normal cycle.
Sanitize
Temp
This option raises the water temperature in the final rinse to sanitize your dishware but may
increase cycle time by 60 minutes. The cycle length will vary depending on the temperature of your
inlet water.
NOTE: This option is monitored for sanitization requirements. If the cycle is interrupted during or
after the main wash portion or if the incoming water temperature is so low that adequate water
heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the Sanitized
light will not illuminate at the end of the cycle. Utilizing this option will modify the cycle to meet the
requirements of Section 6, of the NSF 184 Standard for soil removal and sanitization efficacy.
NOTE: Certified residential dishwashers are not intended for licensed food establishments.
Power Dry
Off - Shuts off the drying option. Dishes air dry naturally and energy is saved. Open the dishwasher
door to speed drying.
On -Turns on the option for faster drying. This option may extend the time to your wash cycle up to
85 minutes. This option is not available with the Rinse or 30 Min. Wash cycle.
Max Dry -This option can be selected by pressing the Power Dry pad twice to illuminate the
Max Dry light. It will add additional time to your drying option, further enhancing the dishwasher’s
performance for difficult to dry items.
Pre Soak Use this option to improve wash performance with heavy or dried-on soils. This option is available
on Intense, Auto Wash, and Normal cycles and may add up to 30 minutes to the cycle time.
Wash
Zones
Selecting either the Upper or Lower Wash Zones will target dishwashing of just one rack. This will
shorten the cycle time and conserve energy. This option should be used when dishes are placed in
only one rack.
Bottle Jets This option increases the time that the bottle jets are on and may add up to 23 minutes to the cycle
time. Use this to wash difficult to clean, dishwasher safe baby bottles, sport bottles, tall coffee cups,
etc. See use recommendations in the Loading the Dishwasher section.
Delay
Hours
Delays the start of a wash cycle up to 8 to 12 hours depending on model. Press DELAY HOURS, to
select the number of hours, then press START one time and close door to begin countdown. The cycle
will start once allotted time has expired.
Control
Lock
You can lock the controls to prevent selections from being made. You can also lock the controls
after you have started a cycle to prevent cycle changes. For example, children cannot accidentally
start the dishwasher by pressing pads with this option selected.
To LOCK the dishwasher control, press and hold both the Pre-Soak and Bottle Jets pads for 3
seconds. The Control Lock light will turn on to indicate the control is locked.
To UNLOCK the dishwasher control, press and hold the Pre-Soak and Bottle Jets pads for 3
seconds. The Control Lock light will turn off to indicate the control is unlocked.
5
49-4000215 Rev. 3
Loading ...
Loading ...
Loading ...