Loading ...
Loading ...
Loading ...
Install the Case in the Window
[]Cut tim window sash seal Io the window width
and stick the adhesive side to the bottom of
the sash.
[] lx)cate the 3 screw holes along the bottom fl'ont
edge of the case. Center the case, side to side,
in the window and mount it to the window sill
using 3 type Bscrews,
-- Windowsashseal
[] Thread two type C bolts into the support
brackefs.
Slide the case into the window and lower the
window behind the mp mounting rail.
Position the brackets on the case tx)ttom so
they will be near Ihe oulermost point on lhe
window sill, Attach the support brackets Io
each side of the case [×)tlom using 4 type A
screws on each side. The case should be
slightly tilted m the outside. Use a level;
about a [/2 bubble will be the con*ect case
slant to the outside.
]
__ TypeAscrews
Topmountingrail
TypeBscrews
[] Extend the left and right accordion panels to
the vertical window sashes and attach with 4
type B screws.
Install the Security Bracket and the Foam Top Window Gasket
[] Attach the _cmily bracket with a type B screw. [] Cut the foam top window gasket to the
window width.
_ Stuff the foam between the glass and the
window to prevent air and insects from gettng
into the room,
13
Loading ...
Loading ...
Loading ...