Loading ...
Loading ...
Loading ...
Readcompletely,thenfollowstep-by-step.
Window Requirements
These instructions are for a standm'd double-
hung window. You wilt need to modil) them for
other _pes of windows.
"l]aeair conditioner can be installed without
the accordion panels ifneeded Io fit in a narrow
window. See tlae window opening dimensions
below.
AS_06
and
AS_08
models
II_ 14 4"n II
I- 25½"te37" FII
] Withaec°rdi°nPands)'_I[
20½" rain
(Withoutaccordionpanels)
All supporting parLs must be secured to filan
wood, masonly or metal.
The elecuical oudet must be within reach of the
power cord.
AS_ I0
models
t
27Y_to41 7-
Withaccordionpanels_ [
'1
23%"rain
(Withoutaccordionpanels}
Storm Window Requirements
A storm window frame will not allow the air
conditioner m flit rewards the outside and will keep
it from draining properly. To adjttst for this, attach
a piece of wood to the stool.
Wood
1/2" higher II
WOODPIECES--
WIDTH:2"
LENGTH:lxmg enough to fit inside the window
frame.
FItlCKNESS:To de telxnine the thickness, place a
piece ofwood on the stool to make it 1/2" higher
than tim top of the stolxn window frame.
Attach securely with nails or screws provided by
the installer.
Remove the Front Grille, if attached
[] l,_emove shipping tape ifpresent. On models
with a slide out air filter, remove it (see the Care
and Cleaning section) and the screw behind it
(ifpresent) that holds the grille in place,
OR
On models with a raise up
inlet grille, lift it (see the
Care and Cleaning _cfion)
and remove the screw
behind it (if present) that
holds tlle grille in place.
] Pull the bottom grille cornels," out to release
the lower tabs on each side,
NOTE: Donot pull the bottom edge toward you more
than 3" or you may damage the tabs of the grille.
_ l,ift the grille up and offthe top tabs.
11
Loading ...
Loading ...
Loading ...