Loading ...
Loading ...
Loading ...
nstalhng Your Refrigerator
How to Remove the Doors and Hinges
Some installations require door removal to get refrigerator to final location. If removal of the pullout drawer is required, see
section entitled How to Remove and Install the Pullout Drawee'.
I Jk WARNING I
To avoid electrical shock which can cause severe personal injury or death, observe the following:
• Disconnect power to refrigerator before removing doors. Connect power only after replacing doors.
[ CAUTION ]
To avoid damage to walls and flooring, protect soft vinyl or other flooring with cardboard, rugs, or other protective material.
toe grille and bottom
bracket cover(s).
Open freezer door as wide as
possible.
Depending on the model of
your unit, you may have one
or two bracket covers.
QJ center hinge pin. f .
ff_ Hold freezer door in place I
I U" while removing center hinge _J
| aemovefreezerdoor. 7_
_nge pin for later use. /
Retain screw and cover for
replacement.
Retain all screws for later use.
Unscrew 5//_6" hex head
screws from top hinge to
remove hinge.
Retain all screws for later use.
later use.
How to Reverse the Doors
_ove the Do_ors and Hinges. J
Transfer cabinet phlgs and
cabinet screws to opposite
side of cabinet.
Remove cabinet plugs with fiat
blade screwdriver tip wrapped
in masking tape.
Remove center mullion screws
with 5/16"hex head driver.
For swing doors only
Remove bottom mullion screws
with 3/8"hex head driver.
IMPORTANT: When working directly on doors, place doors
on a nonabrasive surface protected by towels or rugs to
avoid damage to door finish.
Transfer door stops from
bottom edge of refrigerator _._
and freezer door to opposite '_
side of door edge. _.. vr,,
Use a Phillips screwdriver for removal and
installation.
fgSee HOW tO Install and Remove )
r Handles tO remove andreinstall |
L barites. J
(_ Proceed to HOw to Replace the
"J Doors and Hinges to mount doors.
Loading ...
Loading ...
Loading ...