Loading ...
Loading ...
Loading ...
Aboutthe temperaturecontrols, www.GEAppliances.com
The temperature controls are preset in the factory at5 for both
the refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust
controls, allow24 hours for the refrigerator to reach the setting
you have selected.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
PerformanceAk FlowSystem
The Pettbt_nance :Mr How Svsteln is designed to nmxinfize temperature control in the reliigerator and
fl'eezer compartments. This tmique spedal feature consists of the _dI" Tower along the back wall of the
reiiigerator and the _di" Tunnel on the bottoln portion of the fl'eezer rear wall. Pladng fi_od in fl'ont of the
lou\'eI_ on these colni_onents will not aftect i_eltbI_nance. _dthough the _di" Tower and the _di" Tunnel can
be relnoved, doing so will affect temperattu'e perfim/mi_ce. (For relnoval instructions, on-line, 24 houi_ a
day, contact us at GEAppliances.com or call 800.GE.CARES. In Canada, contact us at w_v.geappliances.ca
or call 1.800.361.3400.)
Loading ...
Loading ...
Loading ...