Loading ...
Loading ...
Loading ...
IYIII IIIIITII (TIIII} IIITIII
(£stimatsl 81818tim8 bassl a I II 18al ®it£ Rsg la Sol [8v81 sstti go}
Heavy Duty
Use this cycle for cottons and linens used regularly. For
maximum soil removal, you should set the Cycle Selector
(Timer) Control for the longest available time.
Normal / Casual
Select this cycle for synthetic fabrics such as dress shirts,
blouses, andslacks. The cycle will give you a load-cooling
spray rinse to reduce wrinkling.
Delicate
This cycle combines slow-speed agitation and slow-speed
spin to gently clean garments while reducing wrinkles.
Handwash
Use this cycle for special care items. This cycle features a
series of brief agitations and short soaks for the gentlest
cleaning and for minimal wrinkling.
2nd Rinse
A second rinse can be used to aid in improved removal of detergent
or bleach residue from garments. This option may be automatically
added to the wash cycle by setting the OPTIONScontrol to 2nd
Rinse anytime before the end of the cycle.
Rinse & Spin
Select this option if you think an extra rinse is needed. Set OPTIONS
Control to 2nd Rinse. You should then set the Cycle Selector (Timer)
Control knob to a 2nd Rinse setting.
Spin Only
A drain and spin may help shorten dryingtimes for some fabrics
by removing excess water. Set OPTIONS Control (if available) to
One Rinse. You should then set Cycle Selector (Timer) Control
to a Spin setting.
SIIL LEVELWITI TII£ AIJISW
Use the Heavy Soil selection for loads that need |
I a more thorough cleaning. Use the Regular Soil selection /
I for garments that are normally soiled. Use Light Soil for |
garments that are only lightly soiled or require a little care.
One Rinse
This is the rinse at the end of each cycle.
2nd Rinse
Choose this option for an automatic 2nd rinse cycle.
TIIIILEIIII}TIII - SIllI$ anl LEAR$
Before you call service...check for the following.
Loud clicking and banging?
• The yellow shipping strap may still be in the rear of the washer.
Completely remove the yellow shipping strap.
• The washer should be level, and the feet should be firmly
on the floor.
Some sounds are normal but may be different from those
of your previous washer.
• The gears engaging after the drain and before the spin.
• The sound of air being pulled through the pump after most
of the water has drained.
Is the washer leaking?
• Fill hose connections are tight.
• Gaskets in fill hose are tight and flat.
• Drain hose clamp is securely attached.
• Faucets, drain/standpipe, or laundry tub is not leaking.
• The washer tub is centered, and the load evenly balanced
at the start of each load.
• The washer is level.
• The front feet are installed, and the nuts are tightened
to the cabinet.
See the Use and Care Guide for complete details.
J
W10026674A ® Registered Trademark / TM Trademark / SM Service Mark of 7/08
© 2008 Sears Brands, LLC. Sears Brands, LLC, used under licensee by Sears Canada Inc. Printed in U.S.A.