Loading ...
Loading ...
Loading ...
MOUNTING
STEP 5
Place the fan unit into the newly cut
square so that each screw hole is
properly aligned. Please make sure
the cut center hole is large enough
that the plastic backside of the fan
does not come into contact with the
cabinet. This is to minimize vibrations
which cause noise.
13
STEP 6
Using the four machine screws, secure
the fan unit’s frame onto the cabinet or
wall. Push each screw through their
corresponding hole located on the frame
and wall. The included wood screws can
also be used instead.Tighten the nuts on
the other side.
Loading ...
Loading ...
Loading ...