Loading ...
Loading ...
Loading ...
Product Assembly
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed.
Read each step carefully before beginning.
Please Hand Tighten All Bolts
Until end of STEP 2
STEP 1c: Seat Slider Loosen the LOCK
KNOB (31), pull out on the POP PIN (9), then
slide the SEAT SLIDER - Assembly (2-ASM)
into the MAIN FRAME - Assembly (1-ASM).
Release Pop Pin (9) into desired hole.
STEP 1a: Main Frame
Attach REAR STABILIZER - Assembly
(4-ASM) to the MAIN FRAME - Assembly
(1ASM) using:
● Two HEX BOLTS, 1/2" X 4" (14)
● Four FLAT WASHERS, 1/2" (10)
● Two NYLON NUTS, THICK 1/2" (12)
8
3/4 SOCKET &
6” EXTENSION
3/4 WRENCHES
Recommended Tools
STEP 1b: Pop Pin
Install POP PIN (9) on to the SEAT SLIDER -
Assembly (2a).
Recommended Tool
3-ASM
4-ASM
5-ASM
2-ASM
1-ASM
Loading ...
Loading ...
Loading ...