Loading ...
Loading ...
Loading ...
5
Care & Cleaning
Warning: Be sure to unplug the oven and allow it to cool before cleaning .
Any spattering that o
ccurs while cooking and comes into contact with the continuous coating is
oxidized while the oven is in operation. If desired, wipe the walls with a damp sponge, cloth or
nylon scouring pad and mild detergent. DO NOT USE STEEL WOOL SCOURING PADS,
ABRASIVE CLEANERS OR SCRAPE THE WALLS WITH A METAL UTENSIL, AS ALL
OF THESE METHODS MAY DAMAGE THE CONTINUOUS CLEAN COATING.
All accessories sho uld be washed in hot soapy water or can be cleaned in a dishwasher. The door
can be wiped with a damp sponge and wiped dry with a paper or cloth t owel. Clean the outside
with a damp sponge. DO NOT USE AN ABRASIVE CLEANER AS IT MAY DAMAGE THE
EXTERIOR FINISH.
DO NOT USE AN ABRASIVE CLEANER OR STEEL WOOL SCOURING PAD ON THE
DRIP PANAS IT MAY DAMAGE THE PORCELAIN ENAMEL FINISH.
LET ALL PARTS AND SURFACES DRY THOROUGHLY PRIOR TO PLUGGING OVEN
IN AND USING.
Due to continuous product improvement, specifications subject to change without prior notice.
WARNING
This appliance is not intended for use by persons (including children) with reduced physical
sensory or mental capabilities, or lack of experience and knowledge, unless they have been g iven
supervision or instruction concerning use of t he appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
1. Never use the device u nsupervised! Switch off the device whenever you are not u sing it, ev en
if this only for s hort while.
2. This appliance is not intended to be operated by means of an e xternal timer or separate
remote-control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, it’s service agent or
similarly qualified persons in order to avoid a hazard.
4. Do not immerse this p roduct in liquid.
This appliance shall not be used by children,
Keep the appliance and its cord out of re ach of children.
Caution: Hot surfaces
All outer surfaces may get hot when the appli ance is operating.