Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
WATER FILTER KIT
Reconnect the power.
Move the refrigerator back into place being careful not to
kink or split the tubing.
Using a large container run the water dispenser to clear air
from lines. This may take a few minutes. Purge and dispense
a minimum of 2 litres of water. Initial water may be black
in colour. This is residual carbon dust from the filter and is
non-toxic. If the water is slow to shut off or the dispenser is
dripping, air may still be in the lines. Either purge more water
through the system to remove this air or allow some time for
the air to be removed over subsequent dispensing.
Connect remaining tube length to filter OUTLET.
STEP 13
STEP 14
STEP 15
STEP 16
STEP 17
STEP 10
Turn on water and check all joints and tubes for leaks.
STEP 12
Connect other end of remaining tube length to inlet
on bottom right hand side of refrigerator back.
STEP 11
inlet
location
Switch ON Ice Maker.
freezer
temp
fridge
temp.
eco/
holiday
quick
freeze
display
lock
drinks
chill
After 24 hours remove ice bin and dispose of first few
batches of ice to ensure that impurities have been flushed
from the system.
Loading ...